Description
Makita DHP453FX12 18 Volt Lithium-Ion Combi Drill with 101 Piece Accessory Set, 1 x 3.0Ah Batteries
The Makita DHP453FX12 is an 18 Volt LXT Combi Drill with a comprehensive 101 piece accessory set contained within the lid, for your convenience. The combi drill can be used in one of three modes Rotary, Rotary Hammer and Screwdriver mode - which is only for drilling into wood and steel, and screwdriver mode for driving in screws with 16+ torque settings, so you can always use the correct power setting.
Features:
- High comfort grips
- Two-speed gearbox with all metal gears
- Conveniently located push button for forward and reverse
- Compact and lightweight design for easy handling
- Single sleeve keyless drill chuck for easy bit installation and removal
- 22 minute charge time with the air cooled Makstar Optimum Charging System
- Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430 percent greater run time
- Temperature overload function which shuts down unit automatically if it overheats
- Variable speed trigger for perfect control when screwdriving
Specifications:
- Voltage: 18 volt
- Battery Type: Lithium-Ion
- Battery Capacity: 3.0Ah
- Maximum Torque: 42 Nm
- Torque Setting: 16+ Drill
- No-Load Speed: 1300-400 rpm
- Impact Rate: 19500-6000 bpm
- Maximum Cutting Capacity (Wood): 36 mm
- Maximum Cutting Capacity (Masonry): 13 mm
- Maximum Cutting Capacity (Steel): 13 mm
- Vibration (Drilling): 2.5 m/s²
- Vibration (Hammer Drilling): 7.5 m/s²
- Vibration K Factor: 1.5 m/s²
- Sound Pressure Level: 78 dB(A)
- Sound Pressure Level Uncertainty: 3 dB(A)
Includes:
- 1 x 3.0Ah Batteries
- 1 x Charger
- 13 x Nutdrivers
- 4 x Drill Stop
- 1 x Hex Key
- 2 x Screw Holders
- 1 x Center Punch
- 1 x Counter Sink
- 6 x Brad Point Drills
- 6 x HSS Drills
- 6 x Masonry Drills
- 3 x Flat Bits
- 5 x Hole Saws
- 1 x Bit Driver Handle
- 1 x 8" Aluminium Spirit Level
- 30 x 25mm Screwdriver Bits
- 20 x 50mm Screwdriver Bits
- 1 x 60mm Magnetic Bit Holder
- 1 x Carry Case