Makita DHP453FX12 18 Volt Lithium-Ion Combi Drill with 101 Piece Accessory Set

Makita DHP453FX12 18 Volt Lithium-Ion Combi Drill with 101 Piece Accessory Set, 1 x 3.0Ah Batteries

The Makita DHP453FX12 is an 18 Volt LXT Combi Drill with a comprehensive 101 piece accessory set contained within the lid, for your convenience. The combi drill can be used in one of three modes Rotary, Rotary Hammer and Screwdriver mode - which is only for drilling into wood and steel, and screwdriver mode for driving in screws with 16+ torque settings, so you can always use the correct power setting.

Features:

• High comfort grips
• Two-speed gearbox with all metal gears
• Conveniently located push button for forward and reverse
• Compact and lightweight design for easy handling
• Single sleeve keyless drill chuck for easy bit installation and removal
• 22 minute charge time with the air cooled Makstar Optimum Charging System
• Lithium-ion batteries have greater life spans than their Ni-MH or Ni-Cad counterparts giving 430 percent greater run time
• Temperature overload function which shuts down unit automatically if it overheats
• Variable speed trigger for perfect control when screwdriving

Specifications:

• Voltage: 18 volt
• Battery Type: Lithium-Ion
• Battery Capacity: 3.0Ah
• Maximum Torque: 42 Nm
• Torque Setting: 16+ Drill
• No-Load Speed: 1300-400 rpm
• Impact Rate: 19500-6000 bpm
• Maximum Cutting Capacity (Wood): 36 mm
• Maximum Cutting Capacity (Masonry): 13 mm
• Maximum Cutting Capacity (Steel): 13 mm
• Vibration (Drilling): 2.5 m/s²
• Vibration (Hammer Drilling): 7.5 m/s²
• Vibration K Factor: 1.5 m/s²
• Sound Pressure Level: 78 dB(A)
• Sound Pressure Level Uncertainty: 3 dB(A)

Includes:

• 1 x 3.0Ah Batteries
• 1 x Charger
• 13 x Nutdrivers
• 4 x Drill Stop
• 1 x Hex Key
• 2 x Screw Holders
• 1 x Center Punch
• 1 x Counter Sink
• 6 x Brad Point Drills
• 6 x HSS Drills
• 6 x Masonry Drills
• 3 x Flat Bits
• 5 x Hole Saws
• 1 x Bit Driver Handle
• 1 x 8" Aluminium Spirit Level
• 30 x 25mm Screwdriver Bits
• 20 x 50mm Screwdriver Bits
• 1 x 60mm Magnetic Bit Holder
• 1 x Carry Case